| |
ID |
Product |
Manufacturer |
Model # / Catalog # |
Serial # |
Status |
|
 | 5040 | 8 Channel Peristaltic Pump | Agilent Technologies | 89092A /
89092AO | 03626-00228 | Available |
Description/Details:
The Agilent 89092A Multichannel Pump is an eight channel peristaltic pump
for the Agilent 8453 UV-visible spectrophotometer for multiple simultaneous
sampling. It can be operated either remotely or manually.
The pump operates on 100–120 VAC or 220–240 VAC and delivers flow up to
13 ml/min and 2 bar from each channel. The pump has a pressure-wheel
assembly for up to eight tubing-cassettes. The pump can be remotely
controlled to start and stop, and change direction, or it can be operated
manually from the front panel.\
Technical Specifications
Power Supply 100–120 VAC, 50–60 Hz
220–240 VAC, 50–60 Hz
Flow Rate 2 to ≈13 ml/min, with 2.06 mm i.d. tubing
Speed 1 to 67 rpm, CW or CCW
Pumping Distance up to 7 m
Pumping Pressure up to 2 bar (30 psi)
Operating Temperature 0 to 40 ºC
Non-Operating Temperature -40 to 65 ºC... |
|
|
 | 5064 | Vacuum Pump | Alcatel | Pascal 2010 SD | 342602 | Available |
Description/Details:
|
|
|
 | 5360 | Peristaltic Pump | Anko Products | MityFlex /
907-101-60108-4 | 02-0029 | Available |
Description/Details:
The Anko 907 is a fixed speed general purpose pump for dispensing fluid based products.
This peristaltic pump is useful for practically anything that flows and can be used almost anywhere, from the laboratory to the laundry room. It can be used to pump coffee, cream or
even soda. Our pumps can be found on shop floors, in kitchens or waste water treatment
plants.
The 907 model can be used to move waste water, chemicals, detergents, food products,
printing inks and many other difficult to handle fluids.
The peristaltic pump is ideal because it is self-priming, acts as a check valve when off, fluid touches only the tube and is easy to service.
The 907 model is controlled by a simple on-off switch that activates the pump. If required, it can run for hours at a time.
STANDARD FEATURES
Electrical: 115 VAG, 60Hz. On-off switch
with 6' (1.8) power cord.
Motor: Shaded pole gear motor - with
stainless steel output shaft.
Pump: Polypropylene with stainless steel
fasteners.
Flow control: Fixed fl... |
|
|
 | 2217 | Control Unit | Argonaut Technologies | QUEST 210 Controller | 3501141 | Available |
Description/Details:
The QUEST 210 SLN is a benchtop system for multistep solution phase chemistry that integrates product synthesis, workup, purification and collection onto a single platform. Specifically designed for medicinal chemistry laboratories, this system reduces the post-synthesis bottleneck by combining synthesis with product workup, purification and collection. In addition to using a fully adjustable proprietary vertical agitation system, this unit heats or cools reaction mixtures by using a built-in connection to a refrigerated recirculating chiller. The system also uses transfer cannulas to transfer reaction mixtures from one set of reaction vessels to another. There is no complex software to operate because all parameters are controlled using a simple menu-driven keypad.... |
|
|
 | 2920 | Aspirator Pump | Boekel Scientific | 177001 | 034505944 | Available |
Description/Details:
|
|
|
 | 4779 | Syringe Pump | Braintree Scientific | BSP-10 | 78656 | Available |
Description/Details:
|
|
|
 | 5337 | Rotary Vane Vacuum Pump | Busch | SV 1003 A | 03011530 | Available |
Description/Details:
Features:
Easy to install
100% oil-free air
Low noise levels
Extra long-life composite vanes
Low maintenance
Application
Ideal for use in various industries such as Packaging, Printing & Paper, Food Industry, Wood Industry, Handling, Environmental Technology and many more.
... |
|
|
 | 4825 | Pump | Carl Creative Systems Inc | PMP/FTTW | 001135 | Available |
Description/Details:
|
|
|
 | 5882 | Dry Vacuum Pump | ChemGlass | CG-4700-50 /
202501 | ED061177 | Available |
Description/Details:
|
|
|
 | 2720 | Masterflex Console Drive | Cole Parmer | 7520-60 | F99004606 | Available |
Description/Details:
Description:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control—ideal for metering applications
-Reversible motor—purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket̵... |
|
|
 | 5358 | Masterflex Console Drive | Cole Parmer | 7520-60 | D06002811 | Available |
Description/Details:
Description:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control—ideal for metering applications
-Reversible motor—purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket̵... |
|
|
 | 5847 | Masterflex Console Drive | Cole Parmer | 7520-60 | M00001594 | Available |
Description/Details:
Description:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control—ideal for metering applications
-Reversible motor—purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket̵... |
|
|
 | 3361 | Masterflex Console Drive with Masterflex Pump | Cole Parmer | 7521-40 Console /
7518-10 Pump | L94002314 | Available |
Description/Details:
Masterflex Console Drive with Masterflex Pump |
|
|
 | 5681 | Digital Console Drive with Masterflex Head | Cole Parmer | 7523-50 | K98003355 | Pending |
Description/Details:
Specifications
Max flow rate 340 mL/min
Min flow rate 0.1 mL/min
Digital dispensing
rpm 1.6 to 100
Reversible motor
Motor watts 75
hp 1/10
Power 90 to 130 VAC
Dimensions Drive 11-1/2"L x 7"W x 7"H
(29.2 x 17.8 x 17.8 cm)
IP rating Drive IP53
Speed control ±0.25% (1 rpm at 600 rpm; 0.1 rpm at 100 rpm)
No. of Pump heads accepted 4
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Quick Load, High Performance, Cartridge, PTFE Tubing, PTFE Diaphragm
Power Amps 1.5
... |
|
|
 | 5682 | Digital Console Drive with Masterflex Head | Cole Parmer | 7523-50 | L01002128 | Pending |
Description/Details:
Specifications
Max flow rate 340 mL/min
Min flow rate 0.1 mL/min
Digital dispensing
rpm 1.6 to 100
Reversible motor
Motor watts 75
hp 1/10
Power 90 to 130 VAC
Dimensions Drive 11-1/2"L x 7"W x 7"H
(29.2 x 17.8 x 17.8 cm)
IP rating Drive IP53
Speed control ±0.25% (1 rpm at 600 rpm; 0.1 rpm at 100 rpm)
No. of Pump heads accepted 4
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Quick Load, High Performance, Cartridge, PTFE Tubing, PTFE Diaphragm
Power Amps 1.5
... |
|
|
 | 5442 | MasterFlex Pump Drive w/ Controller | Cole Parmer | 7591-50 | MO1000899 | Available |
Description/Details:
Cole Parmer Masterflex pump with 7591-50 drive (20-650 rpm), with 7591-60 controller and 77601-10 Pump Head... |
|
|
 | 3369 | Masterflex Console Drive with pump | Cole Parmer | 77200-12 Console /
7518-10 Pump | 899004768 | Available |
Description/Details:
Masterflex Console Drive with Masterflex pump |
|
|
 | 5680 | Analog Drive Console with Masterflex Head | Cole Parmer | 77521-50 | L00003263 | Available |
Description/Details:
Easy-to-use analog drives offer precise speed control and remote control capability—ideal for metering, feed, and transfer applications.
10-turn potentiometer for precise, accurate speed control. Locking lever enables you to lock in your exact speed setting.
Separate speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
Remote control capabilities via DB9 female connector on back of drive—speed control input: 4 to 20 mA, or 2 to 10 VDC; start/stop via open collector or contact closure.
Reversible motor—purge tubing before or after pumping; pump fluid in either direction.
The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
6-ft (1.8-m) line cord
... |
|
|
 | 2839 | Vacuum Pump | Cole Parmer | MasterFlex | 5267 | Available |
Description/Details:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control?ideal for metering applications
-Reversible motor?purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket?pump is sh... |
|
|
| 5068 | Vacuum Pump | Cole Parmer | MasterFlex | D04002396 | Available |
Description/Details:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control?ideal for metering applications
-Reversible motor?purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket?pump is sh... |
|
|
 | 5153 | Vacuum Pump | Cole Parmer | MasterFlex | 5117 | Available |
Description/Details:
These economy analog console drives have ±2% speed control for precise flow regulation making them ideal for metering applications. The simple analog controls let you easily integrate these drives into your lab or process applications. A convenient carrying handle is molded into the housing.
Features:
-Economical and easy-to-use analog drives offer precise speed control?ideal for metering applications
-Reversible motor?purge tubing before or after pumping; pump fluid in either direction.
-Separate single-turn speed control and on/off/reverse switch with inertia center and green LED power indicator. Maintain speed setting while turning pump on/off.
-The 1/10-hp reversible motor has soft start and back EMF for ±2% speed control. Promotes smooth operation and long service life.
-Stackable ABS plastic housing is IP23 rated for splash resistance and easy wipedown.
-6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket?pump is sh... |
|
|
 | 4906 | Compact Variable-Speed Drive | Cole Parmer | MasterFlex LS /
77200-12 | J00006689 | Available |
Description/Details:
Stackable, compact pump drive delivers versatile performance in limited space
Flow rate: 2.1 to 560 mL/min; flow rate depends on drive rpm and tubing size.
Stackable, compact drive measures 5-3/8"L x 5-3/16"W x 4-1/2"H —perfect for small work areas.
Painted steel housing is IP22 rated. Housing protects drive from vertically falling water.
Separate single-turn speed control and on/off switch with green power indicator; maintain speed setting while turning pump on/off.
MAX button runs pump at maximum rpm—use to prime or to rapidly flush tubing.
Reversible permanent magnet DC motor lets you pump in either direction.
Remote control options on the back of pump. Start/stop pump via contact closure.
Specifications
Max flow rate 560 mL/min
Min flow rate 2.1 mL/min
Flow Chart Click to View
rpm 35 to 200
Reversible motor Yes
Power 12 VDC
Dimensions Drive 5-3/8" x 5-3/16" x 4-1/2"
(13.6 x 13.2 x 11.4 cm)
IP rating Drive IP22
Speed control ±5%
No. of Pu... |
|
|
 | 4907 | Compact Variable-Speed Drive | Cole Parmer | MasterFlex LS /
77200-12 | J00006676 | Available |
Description/Details:
Stackable, compact pump drive delivers versatile performance in limited space
Flow rate: 2.1 to 560 mL/min; flow rate depends on drive rpm and tubing size.
Stackable, compact drive measures 5-3/8"L x 5-3/16"W x 4-1/2"H —perfect for small work areas.
Painted steel housing is IP22 rated. Housing protects drive from vertically falling water.
Separate single-turn speed control and on/off switch with green power indicator; maintain speed setting while turning pump on/off.
MAX button runs pump at maximum rpm—use to prime or to rapidly flush tubing.
Reversible permanent magnet DC motor lets you pump in either direction.
Remote control options on the back of pump. Start/stop pump via contact closure.
Specifications
Max flow rate 560 mL/min
Min flow rate 2.1 mL/min
Flow Chart Click to View
rpm 35 to 200
Reversible motor Yes
Power 12 VDC
Dimensions Drive 5-3/8" x 5-3/16" x 4-1/2"
(13.6 x 13.2 x 11.4 cm)
IP rating Drive IP22
Speed control ±5%
No. of Pu... |
|
|
 | 5742 | Compact Variable-Speed Drive | Cole Parmer | MasterFlex LS /
77200-12 | D09000067 | Available |
Description/Details:
Stackable, compact pump drive delivers versatile performance in limited space
Flow rate: 2.1 to 560 mL/min; flow rate depends on drive rpm and tubing size.
Stackable, compact drive measures 5-3/8"L x 5-3/16"W x 4-1/2"H —perfect for small work areas.
Painted steel housing is IP22 rated. Housing protects drive from vertically falling water.
Separate single-turn speed control and on/off switch with green power indicator; maintain speed setting while turning pump on/off.
MAX button runs pump at maximum rpm—use to prime or to rapidly flush tubing.
Reversible permanent magnet DC motor lets you pump in either direction.
Remote control options on the back of pump. Start/stop pump via contact closure.
Specifications
Max flow rate 560 mL/min
Min flow rate 2.1 mL/min
Flow Chart Click to View
rpm 35 to 200
Reversible motor Yes
Power 12 VDC
Dimensions Drive 5-3/8" x 5-3/16" x 4-1/2"
(13.6 x 13.2 x 11.4 cm)
IP rating Drive IP22
Speed control ±5%
No. of Pu... |
|
|
 | 5844 | Compact Variable Speed Drive | Cole Parmer | MasterFlex LS /
900-1255 | C01003680 | Available |
Description/Details:
Shown with Cole Parmer 77250-62 Head
Stackable, compact pump drive delivers versatile performance in limited space
Flow rate: 2.1 to 560 mL/min; flow rate depends on drive rpm and tubing size.
Stackable, compact drive measures 5-3/8"L x 5-3/16"W x 4-1/2"H —perfect for small work areas.
Painted steel housing is IP22 rated. Housing protects drive from vertically falling water.
Separate single-turn speed control and on/off switch with green power indicator; maintain speed setting while turning pump on/off.
MAX button runs pump at maximum rpm—use to prime or to rapidly flush tubing.
Reversible permanent magnet DC motor lets you pump in either direction.
Remote control options on the back of pump. Start/stop pump via contact closure.
Specifications
Max flow rate 560 mL/min
Min flow rate 2.1 mL/min
Flow Chart Click to View
rpm 35 to 200
Reversible motor Yes
Power 12 VDC
IP rating Drive IP22
Speed control ±5%
No. of Pump heads accepted 1
Type of Pump ... |
|
|
 | 2812 | Micro-Oxymax System Sample Pump | Columbus Instruments | Sample Pump | 98208-1 | Available |
Description/Details:
The Columbus Instruments’ Micro-Oxymax system is a highly adaptable general purpose closed circuit respirometer. The system monitors the concentration of gas contained within an enclosed head space into which the material being monitored is respiring. Periodic sensing of the gas concentration, along with an equally accurate measurement of the volume of the head space, allows calculations of incremental and accumulated values for consumption and production. The Micro-Oxymax patented design principle provides a sensing threshold near 2 x 10-7 liter per hour.
... |
|
|
 | 3594 | Pump | Dayton | 4K26ID | R610505DJ200B | Available |
Description/Details:
Vacuum Pump with Dayton Wash Down Motor |
|
|
 | 3595 | Pump | Dayton | 4K26ID | R610505DJ200B | Available |
Description/Details:
Vacuum Pump with Dayton Wash Down Motor |
|
|
 | 5340 | Compressor | Dayton | 5F562E /
SpeedAire | L4/8/99-00161 | Available |
Description/Details:
4 Gallon Compressor |
|
|
 | 2444 | Pump | Edwards | 30 | 004103 | Available |
Description/Details:
|
|
|
 | 2445 | Pump | Edwards | 30 | 900993 | Available |
Description/Details:
|
|
|
 | 3582 | Vacuum Pump | FMI | QD /
JB2R064N# | 42L37652R | Available |
Description/Details:
|
|
|
 | 3584 | Vacuum Pump | FMI | QD /
JB2R064N# | 02L32885R | Available |
Description/Details:
|
|
|
 | 5063 | Vacuum Pump | Franklin Electric | 261962 /
1102685403 | 186821 | Available |
Description/Details:
|
|
|
 | 5496 | Pump | Gast | 0523-V542AQ-G588DX | 0803266009 | Available |
Description/Details:
Pulsation-free, minimal vibration with long service-free life for oil-less or lubricated applications... |
|
|
 | 3596 | Vacuum Pump | Gast | 1423-103Q-G626X | 0101104202 | Available |
Description/Details:
|
|
|
 | 3597 | Vacuum Pump | Gast | 1423-103Q-G626X | 0112109986 | Available |
Description/Details:
|
|
|
 | 5834 | Vacuum Pump | Gast | 72R655-V10-C222TX | 03060160 | Available |
Description/Details:
This alternative reciprocating concept mounts a flexible cup at the top of the connecting rod and creates vacuum or pressure as the cup maintains a seal against the cylinder walls in a rocking motion... |
|
|
 | 3586 | Vacuum Pump | Gast | DAA-V174-EB | 00348573 | Available |
Description/Details:
Vacuum Pump |
|
|
 | 5506 | Compressor/Vacuum Pump | Gast | LOA-P103T-AA | 1092 0312 | Available |
Description/Details:
From air motors to vacuum generators, Gast supplies the pneumatic products that leading OEMs rely upon to run their applications smoothly and efficiently.
... |
|
|
 | 5132 | Air Compressor | Gast | MOA-P109-CA | 9804716293 | Available |
Description/Details:
Diaphragm Type - Vacuum Pumps & Compressors Horsepower: 1/16 Cubic Feet per Minute: 0.50 Voltage: 115-1
Horsepower: 1/16
Cubic Feet per Minute: 0.50
Voltage: 115-1
Compressor Type: Diaphragm Compressors and Vacuum Pumps
Height (Decimal Inch): 4.72
Length (Decimal Inch): 7.03
Maximum PSI: 50
Width (Decimal Inch): 4.28 ... |
|
|
 | 4139 | Pump | GeneVac | CVP100 /
Mk4 | 5307 | Available |
Description/Details:
Concentration Pump |
|
|
 | 5183 | Vacuum Pump | GeneVac | XDS-5 | 046009773 | Available |
Description/Details:
The XDS-5 pump is an innovative design which uses a bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapors.
Adjustable gas ballast allows vapor to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS pumps are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.... |
|
|
 | 2772 | Pump | Gilson | 322 PUMP | 389F9B895 | Available |
Description/Details:
Multisolvent pumps designed for use in Gilson’s HPLC Systems for analytical and semipreparative chromatography. The pump heads are easy to access and simple to maintain, and the pumps are stackable to conserve bench space.
... |
|
|
 | 2771 | Valve Actuator
| Gilson | Valvemate | 330F0A106 | Available |
Description/Details:
Gilson’s VALVEMATE features Valco valves and offers a simple mechanism for installing and/or replacing valves. The VALVEMATE includes an ultra compact footprint and accommodates 2, 6 and 10-position valves with biocompatible versions available.
... |
|
|
 | 2735 | Pump | Hitachi | L-7100 Pump /
P#810-0101 | 1276-016 | Available |
Description/Details:
Pump for HPLC system |
|
|
 | 2881 | Pump | HP-Hewlett Packard | 79853C /
1050 Pump | 3225J01733 | Available |
Description/Details:
|
|
|
 | 5846 | Miniature Peristaltic Pump | HP-Hewlett Packard | 89052B /
1FS | ISM772C-0667 | Available |
Description/Details:
Miniature Peristaltic Pump |
|
|
 | 2891 | Pump | Ismatec | MCP /
ISM404B | 10898-00085 | Available |
Description/Details:
ISMATEC's MCP Process dispensing pumps are ideal for safe dispensing and filling applications, especially in a dusty, humid, corrosive environment and in clean room areas. Individual, application based dispensing and pumping sequences can be programmed directly into a PC (batch-programming) and subsequently downloaded (via the RS232 interface) into one of the four program memories available on the pump drive. Similar to a simple PLC-type controller, the pump and its program will provide on the spot operation as stand-alone units and freely disconnected from the PC. This makes these ISMATEC pump drives extremely suitable for fluid processing requiring accuracy, hygienic conditions, crosslinkability, reliability and expandability. ISMATEC pumps and drives are suitable for applications and processes used in chemistry and biotechnology as well as the pharmaceutical, food and beverage industry.
The MCP Process dispensing pump's analog interface can respond appropriately to input signals ob... |
|
|
 | 5455 | Air Compressor | Jun-Air | 3-1.5 /
1108000 | 439402 | Available |
Description/Details:
Air compressor. 120v, 60Hz, 1.5L tank, 20L/min displacement, 120psi. |
|
|
 | 5123 | Air Compressor | Jun-Air | 6-10 | 523761 | Available |
Description/Details:
|
|
|
 | 5341 | Compressor | Jun-Air | Minor /
DK-9400 | 402687 | Available |
Description/Details:
JUN-AIR introduced the first compressor almost 50 years ago and started the development of the technology and design, which has made it natural to use compressed air for an increasing number of applications. In dental clinics, laboratories, for food and beverages, graphics, door opening devices, medical and health equipment - just to mention a few.
JUN-AIR invests in the latest technology. The compressor has a compact and elegant design, reflecting quality and it is, therefore, highly suitable for installation at the place of use.
Performance and design will always play a key role at the stage of development. At the same time, concern for the environment, low energy consumption, minimum maintenance and user-friendly operation are given high priority.
JUN-AIR supplies clean and quiet air – a complete compressed air solution... |
|
|
 | 3590 | Vacuum Pump | KNF | MPU493-035.1-11.91 | 238164 | Available |
Description/Details:
Vacuum Pump |
|
|
 | 5339 | Mini Diaphragm Vacuum Pumps | KNF | N 86K.18 /
LaboPort | 2.335450 | Available |
Description/Details:
Series N 86 diaphragm pumps are single-head, dry-running devices used in a wide range of laboratory applications. They transfer, compress and pump down without contamination.
The heart of these very compact pumps is a KNF structured diaphragm. This patented diaphragm was stress-optimized using the Finite Elements method. As a result, we were able
to make the pumps smaller while increasing the service life of the diaphragm.
Technical feature
100% oil-free transfer
Pure transfer, evacuation and compression
For slightly aggressive or corrosive gases
and vapors
Maintenance-free
Environmentally friendly
Gastight, leakage rate approx. 6 x 10-3 mbar x l/s, not tested in serial production.... |
|
|
 | 5655 | Vacuum Pump | KNF | N 880.3 AN.22E | 1284745 | Available |
Description/Details:
Description
These models represent a new generation of diaphragm pumps from KNF. They are optimized for efficiency and durability using the latest CAD/FEA methods. Featuring KNF’s BLDC motors and patented, structured diaphragm and multi-port valve system, they provide the best performance and reliability available.
Features
• Now available with compact Brushless DC - New choices in motor technology include KNF's efficient BLDC motor and feature-packed controller. Onoff and speed logic signals provide control of pump performance in direct response to your system requirements. In addition, pump size and heat generation are dramatically reduced in comparison to AC models.
• Exclusive multi-port valve system - KNF’s new multi-port valve system consists of a circle of smaller holes sealed by an elastomeric disk. This enhances the efficiency and tolerance to condensate droplets.
• Patented, structural molded diaphragm - KNF molds a unique structure into the diap... |
|
|
 | 5720 | Diaphragm Vacuum Pumps | KNF | UN820.3 FTP | 1/522049 | Available |
Description/Details:
The chemically-resistant series N820.3 diaphragm pump is single- and double-head, oil-free devices used in a wide range of laboratory applications. They transfer and pump down without contamination.
The heart of these very compact pumps is a KNF structured diaphragm. This patented diaphragm was stress-optimized using the Finite Elements method. As a result, we were able
to make the pumps smaller while increasing the service life of the diaphragm.
Technical features:
100% oil-free transfer
Pure transfer, evacuation and compression
Highly compatible with vapors and condensation
Chemically-resistant
Therefore suitable for highly aggressive or corrosive gases and vapors
Maintenance-free
Environmentally friendly
Gastight, leakage rate approx. 6 x 10-3 mbar x l/s
Technical data:
Delivery (l/min)1)) 20 20
Ultimate vacuum
(Torr) 6
Operating pressure
(psi) 15
Connectors for tube (in.) ID 3/8"
Permissible gas and
ambient temperature +5...+40 °C
Voltage/Frequencies 115V/60Hz
Motor pr... |
|
|
 | 5214 | Digital Vacuum Guage | Kurt J. Lesker Co. | KJL-902006 | 061208005 | Available |
Description/Details:
Shown with KJL-902018 vacuum sensor |
|
|
 | 4682 | Medium Pressure Blower | Leister | Silence 100 mm | 781671 | Available |
Description/Details:
- Simple Plug & Play Operation
- Mounting Bracket
- Available as three phase
- High Air Flow
Air Output:
(L/min) 4700 6000
Pressure: (Pa) 1000 1400
Noise Level: 61db 61db
Voltages Available: 230 400 230 400
Frequency: 50 60
... |
|
|
 | 5472 | Pump | Medo USA | AC0102 | S0306017 | Available |
Description/Details:
Specification USA Europe
Voltage : 115V AC 230V AC
Rated Airflow : 0.177 cfm 5 lpm
Maximum Pressure : 5.69 psig 0.4 bar
Rated Pressure : 2.84 psig 0.2 bar
Frequency : 60 Hz 50 Hz
Noise Level : 40 dB(A) Max. @ 1 meter
Outlet : 6 mm O.D. hose nipple
Coil Insulation Class : UL Class B
Mounting Dimensions : 1.9" x 2.4" 48 x 62 mm
Leadwire Length : 7-7/8" 200 mm
Gross Weight : 1.54 lbs. .7 kg
Recognition : UL CE
Duty Cycle : Continuous
Life Expectancy : 3,000 Hours
Power Consumption : 15W (USA) 14W (Europe)
... |
|
|
 | 3591 | Vacuum Pump | Micro Pump | 120-000 /
81110 129 | 423193 | Available |
Description/Details:
vacuum pump |
|
|
 | 4462 | Vacuum Pump | Millipore | XF54 230 50 | F5BM94114 | Available |
Description/Details:
|
|
|
 | 2587 | Pump | Pharmacia Biotech | Pump P-1 | 56300551 M2 006564 | Available |
Description/Details:
|
|
|
 | 5377 | Oil-less Compressor | Powerex | SLP030871 | RF840 | Available |
Description/Details:
Powerex, The Leader in Pure Air Technology, continues its commitment to design and manufacture compressors and compressor systems delivering your "Pure Air" requirements year after year. This world class technology has resulted from the combined engineering and production efforts of two of the largest compressor manufactures in the world, created a new breed of oilless and lubricated compressor systems: both affordable and reliable!... |
|
|
 | 2913 | Pump | Rietschle | Pico /
VLT10 | 012084854 | Available |
Description/Details:
|
|
|
 | 5311 | Vacuum Pump System | Rietschle | VCSD-025-061-F | 150200526 | Available |
Description/Details:
Systems
Our specialist teams of project engineers have designed and built tailor-made solutions to meet our customers’ specific vacuum and pressure needs for many decades.
We are committed to extensive and continuous Research and Development to enable us to engineer tailored solutions for a wide array of applications such as
Blast air and vacuum supply for applications in printing and paper industries
Lifting, holding, handling and clamping
Conveying
Distillation
Evacuation of industrial furnaces
Packaging
Impregnation
Degassing of sintered material
Cooling
Designing and building engineered solutions requires a high degree of expertise.
... |
|
|
 | 2815 | Gel Pump | Savant | GP 100 /
GP 100 115 | GP1002K4610401B | Available |
Description/Details:
Savant GP100 Electrophoresis Pump, Savant, Model GP100 |
|
|
 | 3067 | Gel Pump | Savant | GP 100 /
GP 100 115 | GP100-3B 60074-1B | Available |
Description/Details:
Savant GP100 Electrophoresis Pump, Savant, Model GP100 |
|
|
 | 3070 | Gel Pump | Savant | GP 100 /
GP 100 115 | GP100-3B 60097-1B | Available |
Description/Details:
Savant GP100 Electrophoresis Pump, Savant, Model GP100 |
|
|
 | 3071 | Gel Pump | Savant | GP 100 /
GP 100 115 | GP100-3B-60076-1B | Available |
Description/Details:
Savant GP100 Electrophoresis Pump, Savant, Model GP100 |
|
|
 | 3756 | Syringe Driver | Sci-Tek | Syringe Driver /
Syringe Driver | 0401030273 | Available |
Description/Details:
Syringe Driver |
|
|
 | 3749 | Vacuum Controller | Sci-Tek | Vacuum Controller | 0401030344 | Available |
Description/Details:
Vacuum Controller |
|
|
 | 3753 | Vacuum Controller | Sci-Tek | Vacuum Controller | 0401030343 | Available |
Description/Details:
Vacuum Controller |
|
|
 | 3754 | Vacuum Controller | Sci-Tek | Vacuum Controller | 0401030342 | Available |
Description/Details:
Vacuum Controller |
|
|
 | 3755 | Vacuum Controller | Sci-Tek | Vacuum Controller | 0301060006 | Available |
Description/Details:
Vacuum Controller |
|
|
 | 5261 | Vacuum Pump | Skatron | 96219 | 0159 | Available |
Description/Details:
|
|
|
 | 5612 | Vacuum Pump | Thomas Industries | 607CA22G | 0401 00013601 | Available |
Description/Details:
Vacuum Pump |
|
Newsletter
