| |
ID |
Product |
Manufacturer |
Model # / Catalog # |
Serial # |
Status |
|
 | 3083 | UF System Purifier | 3S | 40UF015 | none | Available |
Description/Details:
UF System Purifier |
|
|
 | 3721 | O2 Analyzer | Advanced Instruments | GPR-20 | 40953267 | Available |
Description/Details:
GPR-20 series % O2 analyzer. Technical Specifications
Ranges: 0-1%, 0-10%, 0-100%
Accuracy (the greater of):
At constant temperature: ±2% of reading or ±0.5% FS
Over operating range: ±5% of reading or ±1.25% FS
Sensitivity: 500 ppm (0.05% oxygen)
Resolution of display: 0.001% on 0-1% range
Operating range: -10°C to +50°C
Response time 90% of full scale: 9 seconds
Drift: Less than 0.11% of reading per °C
Pressure: Flowing stream inlet 5-30 psig with flow control
of 1-5 SCFH; pump models sample inlet slight vacuum
to atmospheric; vent to atmosphere
Flow sensitivity: Insensitive between 1 to 5 SCFH
Calibration: 3-4 months using ambient air or certified
gas approximating 80% of range or next higher
Application: Suitable for continuous use in industrial
gases and intermittent use in acid gases.... |
|
|
 | 2837 | Containment Hood Blower Only | AIRFILTRONIX | HS3000 /
HS-3000-3
| 12158 | Available |
Description/Details:
Blower only to fit G-24, G-30 or G-50 containment hood. |
|
|
 | 2838 | Containment Hood Blower Only | AIRFILTRONIX | HS3000 /
HS-3000-3
| 11875 | Available |
Description/Details:
Blower only to fit G-24, G-30 or G-50 containment hood. |
|
|
 | 2843 | Containment Hood Blower Only | AIRFILTRONIX | HS3000 /
HS-3000-3
| 12157 | Available |
Description/Details:
Blower only to fit G-24, G-30 or G-50 containment hood. |
|
|
 | 2844 | Containment Hood Blower Only | AIRFILTRONIX | HS3000 /
HS-3000-3
| 11870 | Available |
Description/Details:
Blower only to fit G-24, G-30 or G-50 containment hood. |
|
|
 | 5184 | Extraction Arm | Alsident System | System 75 | N/A5184 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5185 | Extraction Arm | Alsident System | System 75 | N/A5185 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5186 | Extraction Arm | Alsident System | System 75 | N/A5186 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5187 | Extraction Arm | Alsident System | System 75 | N/A5187 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5188 | Extraction Arm | Alsident System | System 75 | N/A5188 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5189 | Extraction Arm | Alsident System | System 75 | N/A5189 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5190 | Extraction Arm | Alsident System | System 75 | N/A5190 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5191 | Extraction Arm | Alsident System | System 75 | N/A5191 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5192 | Extraction Arm | Alsident System | System 75 | N/A5192 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5193 | Extraction Arm | Alsident System | System 75 | N/A5193 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5194 | Extraction Arm | Alsident System | System 75 | N/A5194 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5195 | Extraction Arm | Alsident System | System 75 | N/A5195 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5196 | Extraction Arm | Alsident System | System 75 | N/A5196 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5197 | Extraction Arm | Alsident System | System 75 | N/A5197 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5198 | Extraction Arm | Alsident System | System 75 | N/A5198 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 5199 | Extraction Arm | Alsident System | System 75 | N/A5199 | Available |
Description/Details:
ALSIDENT SYSTEM 75
ALSIDENT SYSTEM 75 extraction arms are self-sustaining with an internal bearing spring, Aluminium or PP-pipes, joints of Polypropylene (PP) and internal components of stainless steel (AISI 316L). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process.
An extraction arm from ALSIDENT SYSTEM consists of three basic parts - the arm itself, a hood and a bracket for mounting. The extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation.
... |
|
|
 | 4385 | Water Purifier | Aquafine | SL-10A | DS 98 44 | Available |
Description/Details:
Ultraviolet UV Water Sterilizer Purifier |
|
|
 | 3985 | Pipette Calibration System | Artel | 320 /
300-03 | 320 | Available |
Description/Details:
The ARTEL PCS is a universal system for calibrating and verifying the volume dispensed from a single channel pipette. The PCS is fast, easy, accurate and precise at any volume — wherever and whenever you need it.
... |
|
|
 | 4852 | Roto Mix Plater Mixer | Barnstead/Thermolyne | M50825 | 108802316424 | Available |
Description/Details:
Roto Mix Plater Mixer |
|
|
 | 4966 | Mixer | Barnstead/Thermolyne | M50825 /
Roto Mixer | 766961138956 | Available |
Description/Details:
Mixer |
|
|
 | 4967 | Mixer | Barnstead/Thermolyne | M50825 /
Roto Mixer | 1088070131394 | Available |
Description/Details:
Mixer |
|
|
 | 5862 | Shaker | Barnstead/Thermolyne | MaxQ 3000 /
SHKA3000 | 1411070355398 | Pending |
Description/Details:
Features:
Triple eccentric drive enables continuous 24-hour operation, handles heavier loads and provides smooth uniform agitation of full or unbalanced loads even at high speeds.
Unit operates in temperature ranges of 4 to 40ºC and humidity conditions from 20 to 80% non-condensing enabling them to be used in incubators, warm rooms, environmental chambers and refrigerators.
Automatic shaker shut down and audible/visual alarms signal if unit operates +/-10% of set speed preventing shaker from walking.
View speed, operating time and temperature simultaneously on 3 individual LED displays which helps minimize errors in establishing running conditions.
Soft start feature eliminates splashing of vessel contents, wetting of flask closure, and helps prevent sudden starts and stops.
Set point retention retains parameters during power failure and restarts unit automatically after power is restored.
RS232 interface allows remote monitoring of speed, time and temperature.
Solid state ... |
|
|
 | 5528 | Orbital Shaker | Bellco Glass Inc | 7744-08115 | UCMSB-622 | Available |
Description/Details:
The Bellco benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well microtube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 RPM and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory.
Supplied with out Shaker Tray. Trays sold separalety
Features:
Cast iron ballast and optional anti-skid frame eliminate “walking” of the unit
“Peg and Grommet” platform design permits quick tray changes
True orbital motion results in increased mixture homogeneity
Accepts both rigid polystyrene and flexible polyvinyl 96-well plates
Low-profile compact design fits minimum of space
100 second tim... |
|
|
 | 5255 | Electrophoresis Power Supply | BioRad | 3000xi | 1077 | Available |
Description/Details:
Bio-Rads Model 3000Xi power supply produces constant voltage to 3000 volts, constant current to 300 mA, and constant power to 400 watts. This fully switching, microprocessor controlled unit may be used with any electrophoresis instrument. The high outputs make this power supply ideal for electrofocusing, DNA sequencing, and isotachophoresis. This power supply is useful as a general purpose instrument and is recommended for SDS PAGE electrophoresis, 2-D electrophoresis, native gel electrophoresis, electrophoretic blotting, and DNA-RNA separations.
Features:
Output range: 25-3000V in 1V steps
0-300mA in 1mA steps
0-400W in 1W steps.
Can store 10 programs
3 steps per program
2 sets of output terminals... |
|
|
 | 5718 | Semi-Dry Electrophoretic Transfer Cell | BioRad | Transblot SD Cell | 221BR19394 | Available |
Description/Details:
Specifications
Construction
Trans-Blot SD body Molded polycarbonate
Anode Platinum-coated titanium
Cathode Stainless steel
Anode platform Precision machined acrylic
Overall size 37 cm x 24 cm x 11 cm
Maximum gel size 25 cm x 18.5 cm... |
|
|
 | 5719 | Semi-Dry Electrophoretic Transfer Cell | BioRad | Transblot SD Cell | 221BR24628 | Available |
Description/Details:
Specifications
Construction
Trans-Blot SD body Molded polycarbonate
Anode Platinum-coated titanium
Cathode Stainless steel
Anode platform Precision machined acrylic
Overall size 37 cm x 24 cm x 11 cm
Maximum gel size 25 cm x 18.5 cm... |
|
|
 | 4968 | Rocker | Boekel Scientific | Rocker II /
260350 | 074205787 | Available |
Description/Details:
Rocker II |
|
|
 | 5351 | Pipette Stand | BoiHit | Pipette Stand | SP05157 | Available |
Description/Details:
|
|
|
 | 2328 | Dispensette III Easy Calibration | BrandTech Scientific Inc | 1-10 ml | 11Z0146 | Available |
Description/Details:
Dispensette III (red color-code): for dispensing aggressive reagents, including concentrated acids such as H3PO4, H2SO4, bases like NaOH, KOH, saline solutions as well as many organic solvents - directly from a supply bottle.
• Easy to dismantle for cleaning, with replaceable filling valves
• Autoclavable at 121 °C
• Digital display: Especially easy to read and dispensing volume can be set accurately and reproducibly (mechanical counter)
• Easy Calibration: Innovative technique for adjustment in seconds without tools.
• SafetyPrime™ recirculation valve reduces reagent waste and the safety discharge system reduces the risk of inadvertent dispensing and splashes.
• To allow the bottle label to face the user, the valve block can be rotated 360°.
• A telescopic filling tube adjusts easily to different size bottles.
The parts of the Dispensette III which are in contact with medium are made of:
Borosilicate glass, ceramic, platium-ir... |
|
|
 | 2329 | Dispensette III Easy Calibration | BrandTech Scientific Inc | 1-10 ml | 09Z3328 | Available |
Description/Details:
Dispensette III (red color-code): for dispensing aggressive reagents, including concentrated acids such as H3PO4, H2SO4, bases like NaOH, KOH, saline solutions as well as many organic solvents - directly from a supply bottle.
• Easy to dismantle for cleaning, with replaceable filling valves
• Autoclavable at 121 °C
• Digital display: Especially easy to read and dispensing volume can be set accurately and reproducibly (mechanical counter)
• Easy Calibration: Innovative technique for adjustment in seconds without tools.
• SafetyPrime™ recirculation valve reduces reagent waste and the safety discharge system reduces the risk of inadvertent dispensing and splashes.
• To allow the bottle label to face the user, the valve block can be rotated 360°.
• A telescopic filling tube adjusts easily to different size bottles.
The parts of the Dispensette III which are in contact with medium are made of:
Borosilicate glass, ceramic, platium-ir... |
|
|
 | 5483 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 2.5-25ul | 03T4931 | Available |
Description/Details:
|
|
|
 | 5484 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 2.5-25ul | 11S3710 | Available |
Description/Details:
|
|
|
 | 5485 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 2.5-25ul | 02U1552 | Available |
Description/Details:
|
|
|
 | 5486 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 20-200ul | 11S4227 | Available |
Description/Details:
|
|
|
 | 5487 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 20-200ul | 09T3351 | Available |
Description/Details:
|
|
|
 | 5481 | Multichannel Pipette | BrandTech Scientific Inc | Transferpette 5-50ul | 07X3175 | Available |
Description/Details:
|
|
|
 | 159 | Ultrasonic Cleaner | Branson | 1510 /
1510R-DTH | RKC070489329D | Available |
Description/Details:
Ultrasonic Cleaner Branson 1510 Designed and constructed for longevity and consistency in performance. The design is very functional with controls mounted in an accessible control panel above and behind the cleaning tank. The tank is stainless steel while the housing is made of a tough molded plastic completely sealed and protected. Features a mechanical timer (0-60 mins.), with a hold for continuous operation. Unit is 120 volt, heated, and comes with a cover. Input watts is 80. Tank capacity is 1/2 gallon. Tank size is 6"L x 5-1/2"W x 4"D. Overall dimension is 10"L x 12"W x 11-1/2"D.... |
|
|
 | 2548 | Ultrasonic Cleaner | Branson | 1510 /
1510R-DTH | RKC070609111D | Available |
Description/Details:
Ultrasonic Cleaner Branson 1510 Designed and constructed for longevity and consistency in performance. The design is very functional with controls mounted in an accessible control panel above and behind the cleaning tank. The tank is stainless steel while the housing is made of a tough molded plastic completely sealed and protected. Features a mechanical timer (0-60 mins.), with a hold for continuous operation. Unit is 120 volt, heated, and comes with a cover. Input watts is 80. Tank capacity is 1/2 gallon. Tank size is 6"L x 5-1/2"W x 4"D. Overall dimension is 10"L x 12"W x 11-1/2"D.... |
|
|
 | 5406 | Ultrasonic Waterbath | Branson | B8200R-4 | N/A 5406 | Available |
Description/Details:
Branson 10.2 Liter Capacity Ultrasonic Bath with Heater and Timer, model #B-8200R-4, 115 volt. Inside dimensions are 11" wide x 19" long x 6" high. Comes with cover and a 30-day warranty. ... |
|
|
 | 5812 | Ultrasonic Sonicator | Branson | P/S Bio 250 | BH03017429 | Available |
Description/Details:
The radiofrequency (RF) power supply in the Sonifier converts line voltage into electrical energy at approx. 20,000 Hz. The RF power supply is adjusted to a defined frequency with a certain tolerance range.
The electrical oscillations are fed to the so-called converter using an RF cable. The converter converts the electrical oscillations into mechanical vibrations at the same frequency in axial direction. The conversion is caused by piezo-ceramic oscillator elements. The mechanical vibrations have an amplitude of approx. 40 μm. The horn connected to the converter amplifies the vibrations by a desired amount and feeds them into the solution to which ultrasonics is to be applied.
The amplification of the amplitude by a 1/2’’ titanium horn (step horn) can be up to 145 μm. Using a conical micro tip with 3mm tip diameter up to 500 μm can be achieved.
In the liquid to which ultrasonics is applied the ultrasonic vibrations cause high-frequency pressure differences r... |
|
|
 | 4929 | Water bath | BUCHI | B-480 | 402637032427002 | Available |
Description/Details:
Buchi Water Bath Model B-480 |
|
|
 | 4932 | Waterbath | BUCHI | B-481 | 10047972 | Available |
Description/Details:
|
|
|
 | 4930 | Rotavapor | BUCHI | R-124 | 10008566 | Available |
Description/Details:
Shown w/ Buchi B-480 Waterbath
Variable (5-240 rpm) speed with an electronic control and digital display.
• Digital water bath, temperature up to 100 °C.
• Temperature resolution 1°C, accuracy 2 °C
• Servo jack, sparkless motor.
... |
|
|
 | 3739 | Fume Hood | Contamination Control Inc | 931-61 | 15555B | Available |
Description/Details:
Fume Hood |
|
|
 | 3545 | Hot Plate Stirrer | Corning | PC-160 | PC160 | Available |
Description/Details:
Hot Plate Stirrer |
|
|
 | 4794 | Overhead Stirrer | Eberbach Corporation | 7085 | 119705 | Available |
Description/Details:
|
|
|
 | 4828 | Overhead Stirrer | Eberbach Corporation | 7085 | 119701 | Available |
Description/Details:
|
|
|
 | 3677 | Temperature Monitor | Endress + Hauser | Mini-Log B /
RDL10-s1c1c4 | 54004F040A32003 | Available |
Description/Details:
Areas of application
Data storage for temperature, humidity, pressure, flow, level and analysis values
Temperature monitoring:
Store temperatures and transport temperature measurement
Operation time recording
Access monitoring
Piece part and quantity recording
Quantity recording by integrating the analogue signal
Where measured values are to be automatically recorded and stored
Start analogue value recording using an external digital control signal
ON/OFF signals are stored using date and time and displayed in ReadWin® 2000
Benefits at a glance
Variable sensor connections using 0/4 to 20 mA, 0 to 1 V or Pt100, as well as potential free contact for event or count impulses
Instantaneous value or min-, max-, average value recording
Measured value storage always includes date and time
Storage of up to 64,000 measured values
Presettable storage cycle (1 minute to 24 hours)
Stand alone battery powered unit or for external power supply available
Rob... |
|
|
 | 3460 | Pipettor 8 Channel (M) | Eppendorf North America Inc | 0.5-10 ul /
Research | 2016917 | Available |
Description/Details:
Multi-channel pipettors have the popular design of the Eppendorf Research series pipettors in both 8 channel and 12 channel models. The magnified digital volume display is visible during use. Individual seals and chemically-resistant pistons allow for easy servicing. Multi-channel manifold rotates 360° and is autoclavable at 121°C. Interchangeable 8 and 12 channel manifolds within the same volume range offers versatility of use. ... |
|
|
 | 3464 | Pipettor 8 Channel (M) | Eppendorf North America Inc | 10-100 ul /
Research | 1248507 | Available |
Description/Details:
Multi-channel pipettors have the popular design of the Eppendorf Research series pipettors in both 8 channel and 12 channel models. The magnified digital volume display is visible during use. Individual seals and chemically-resistant pistons allow for easy servicing. Multi-channel manifold rotates 360° and is autoclavable at 121°C. Interchangeable 8 and 12 channel manifolds within the same volume range offers versatility of use. ... |
|
|
 | 3465 | Pipettor 8 Channel (M) | Eppendorf North America Inc | 10-100 ul /
Research | 1248527 | Available |
Description/Details:
Multi-channel pipettors have the popular design of the Eppendorf Research series pipettors in both 8 channel and 12 channel models. The magnified digital volume display is visible during use. Individual seals and chemically-resistant pistons allow for easy servicing. Multi-channel manifold rotates 360° and is autoclavable at 121°C. Interchangeable 8 and 12 channel manifolds within the same volume range offers versatility of use. ... |
|
Newsletter
